Polymer Filled
Features and Benefits
- Superior heat and wear resistance
- Recommended for moderate to high speed dynamic service running against soft metals
- Non-abrasive
Working Temperature Range
-450° to +600°F Tan
[-268° to +316°C]
Color
Tan
Typical Physical Property Values
Properties1 |
ASTM |
Units (Metric) |
Value (Metric) |
| Physical Specific Gravity |
D792 |
— |
2.03 |
| Mechanical Tensile Strength |
D4894 |
PSI [MPa] |
3,000 [20.7] |
| Tensile Modulus | D4894 | PSI [MPa] | 55,000 [379] |
| Elongation | D4894 | % | 230 |
| Compression Strength2 | D695 | PSI [MPa] | 1,000 [6.89] |
| Compressive Modulus | D695 | PSI [MPa] | 95,000 [655] |
| Deformation Under Load3 | D621 | % | 8.3 |
| Hardness | D2240 | Shore D | 60 |
| Coefficient of Friction | Saint-Gobain | — | .20 |
| Thermal Linear Coefficient of Thermal Expansion |
E831 |
in./in./°F |
7.05 x 10-5 |
| (78° to 392°F [26° to 200°C]) | [mm/mm/°C] | [12.7 x 10-5] | |
| Mold Direction | in./in./°F | 7.36 x 10-5 | |
| Cross Direction | [mm/mm/°C] | [13.2 x 10-5] |
1 All testing is performed at room temperature unless otherwise specified
2 Compression Strength was tested at !% strain
3 Deformation Under Load was tested at 2,000 PSI for 24 hours
